Your shopping cart is empty!
Woodburner and Stove Glass - Woodburner and Stove Glass cut to the size and shape to fit your fire. We are able to supply flat, ceramic glass for replacement glass in wood burning and multi-fuel stoves. All our ceramic glass is 4mm thick and has Arrised edges as standard. An Arrised edge means the sharp, rough edges of the glass have been taken off making it safer and easier to handle.
Glass cut to size for most makes and models of woodburner and multi fuel stoves including: Villager, Stovax, Dimplex, Rayburn, Stanley, Aga, Town and Country, Woodman.
We also supply rope and adhesive for fitting your glass. Always fit to a cold appliance taking care to make sure all surfaces are clean and dry. Please follow the manufacturer’s instructions carefully with the rope, silicone and glue.
Please note the lead time for this product is approximately 3 -5 working days.
Choose the shape of the glass
Choose the thickness of the glass
Change the base width of the current shape
Change the height of the current shape
Change the radius of the circle
Change length C of the current shape
Change length D of the current shape
Please note we have a +/- 2mm tolerance all our glass
Krypton Gas provides far superior insulation. Heavier than air, the gases help to maintain a constant temperature in the home as well as offering better soundproofing too.
Our Woodburner and stove glass comes with Arrised edges as standard
Arrised Edges have the sharp edges removed
Please note if no polished edges are required edgework quality is not guaranteed.
All over sandblasting added to glass to give a white frosted effect
Sandblasted border added to the glass
A Clear Film applied to the backing of the mirror to help keep the mirror together if it breaks. If you are fixing the mirror with adhesive, please check your adhesive is suitable to use with Safety Backing
For Single panels. The glass will be cut with the pattern in the centre of the glass
For Multiple Panels. Used with panels that are next to each other, so the pattern continues through all the panels. Please note we will require a drawing showing the layout of the panels
An easy clean coating that is applied to the glass that allows water to run off the glass. Most commonly used for shower screens
The minimum drilled hole diameter is 4mm and the maximum is 38mm. Drilled holes cannot be less than the glass thickness. Drilled holes are usually used for fixing holes in glass.
These are circular drilled holes, larger than 38mm. Usually used for Fans, Vents or pet flaps
Curved outer edge on corners. The higher the radius, the greater the curve
An internal section of the glass is cut out to accommodate plug sockets, pipework, hobs, etc.
Please select the RAL colour for your painted glass
You are about to add this custom item to your cart.
Please ensure that your specifications are correct and complete, as UK Glass Centre will not accept responsibility for any errors in data entry.
Note that there are no refunds or replacements for custom items.
0 reviews / Write a review
Our Stove Rope, seal packs contain: 1 x 2m length of 3mm rope and 30ml of Superseal high temperature..
From £10.74
Our Stove Rope Seal packs contain: 1 x 2m length of 25 mm rope and 30ml of Superseal high temperatur..
From £28.21
This high performance, permanently flexible silicone sealant is heat resistant to 1200°C. It does n..
From £19.57
Please note the lead time for this product is approximately up to 15-20 working days.Glass Fire..
From £55.64